Common hard disk failures

Hard disk drives could fail in any of the following ways :

Electrical Failure Firmware Failure

Mechanical Failure Bad Platter Area

Logical Failure Complex Failure Mode

A 2.5" hard drive PCB Board

Electrical Failure

The PCB is the “middleman” of sorts, controlling, communicating and coordinating to read and write data between the hard disk and the computer. As such, if the PCB gets damaged due to power surges or power spikes, you lose access to your data. Frequently, the pre-amplifier circuit of read-write head may also be affected.

Symptoms

Drive is powered, but shows no sign of function Disk knocking as the motor fails to spin Clicking sound as the heads search or initialize

 Back to Top

Mechanical Failure

Mechanical damage normally arises as a result of impact or wear and tear.
Internal components, like the read-write head and motors, can become faulty without prior warning. The much dreaded head crash could be a by-product of mechanical failure.

Symptoms

Clicking, grinding sounds Completely quiet due to " motor freeze" "music" tone as the disk is powered up

 Back to Top

Logical Failure

Logical failure refers to any other non-physical failure types. It can be the easiest or the most difficult recovery job depending on the circumstances that leads to logical failure.

Some examples include: Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more.

 Back to Top

Firmware Failure

Firmware is the software program normally only accessible by the disk manufacturers. It is used to do low level disk testing and functions that are directly responsible for the proper functions and healthy state of hard disk.

Without the firmware code, no communication will be possible between the PC system and the hard disk.

Modern disks normally have their firmware codes located on data platters and also the PCB board. If the firmware area of the platter is corrupted, the drive will appear to have failed even all the electrical and mechanical components are still fully functional.

Symptoms

drive powers up, but is not recognised by the computer drive powers up, but is recognised wrongly, sometimes with nonsensical characters drive freezes during booting up

 Back to Top

Bad Platter Area

A hard drive platter

This is commonly coined as "bad sectors" which are seen as inaccessible data blocks or sectors during reading or writing operation. The main cause is due to wear and tear of platter surface, head crash, manufacturing defects and tracking errors.

There are various levels of bad sector severity. Depending on the situation, different techniques will have to used to "maximise" the recovery yield.

Symptoms

Hard disk still accessible but appear to "hang" or "sluggish" Constant Cyclic Redundancy (CRC) errors Unable to access folders or files which could be seen

 Back to Top

Complex Failure Model

Most often, hard disk may not fail in just any single mode. The failure could cause by a combination of some or all the failure modes, normally triggering by one to another. For instance, a read write head crash due to mechanical failure could leave to logical file system damage as well as firmware code corruption. Bad sectors development is also a natural by-product under such circumstances.

 Back to Top